LZ-GF-C Custom Logo Electric Golf Cart, OEM Branded Fleet
The LZ-GF-C exists to carry a brand rather than a passenger. Most vehicles on a private site are functional objects that happen to be visible. A branded cart is a moving sign that keeps working while it is parked, and the difference is most obvious at exactly the moment a first-time visitor is looking for where to go.
The most visible placement is the front fascia panel, which accepts a backlit OEM logo insert. From there the options widen: body panels, roof panels and seat backs can all carry artwork, so the branding reads from the front, from the side and from behind a vehicle queueing at a gate. Two-tone paint and full colour matching against a reference image or Pantone code are both available.
The important operational point is that branding does not lock you into one vehicle type. The LZ-GF-C designation applies across the Q, Y, T, X, J and K platforms, so a fleet can carry one brand across a paved resort shuttle, a rough-site utility run and an off-road estate vehicle. Consistency of brand without compromise on what each cart is actually for.
A cart that shows your name before it shows its spec sheet.
01
Why the front logo is lit
A printed logo disappears at dusk, which is exactly when a resort or car park entrance is busiest. The illuminated front fascia insert keeps the brand readable after dark without adding separate lighting hardware to the vehicle.
This is why the illuminated panel, rather than a printed decal, is the primary branding route on this series. Printed artwork still works well on the body sides, roof and seat backs where the vehicle is usually seen in daylight. Used together, the two approaches cover most of a vehicle’s visible life.
02
Where the branding goes, in order of visibility
Placement should follow sightlines, not available flat space. The front fascia is the first thing anyone approaching the vehicle sees. The seat backs are the first thing anyone looking at a vehicle from behind sees, which on a shuttle queue at a gate is a captive audience of waiting passengers.
Body sides and the roof panel are the third layer, visible mainly when the cart is parked in a display position or moving across open ground. Interior touch points, including steering wheel cover, floor mat and pedal trim, complete the effect for a fleet where drivers spend the whole day in view of the brand.
03
Getting the artwork right first time
Most custom branding problems are artwork problems rather than production problems. Low-resolution files, RGB images converted late, and Pantone references supplied as a photograph all lead to a colour that is close but not right.
Vector artwork is worth asking for even when the logo originated as a raster file, because it scales cleanly onto panels of different sizes. Supplying a Pantone code alongside a reference image saves a round of samples, and for a first-time custom order a pre-production sample is normally worth arranging so the fleet standard is agreed before a full batch is produced.
Key Features
What sets the LZ-GF-C apart
01
Illuminated front logo
OEM logo insert mounted in the front fascia with backlit LED illumination for night visibility.
02
Full body colour matching
Panels, roof and accents matched to your brand palette against a supplied reference image or Pantone code.
03
Seat back artwork
Custom printed seat backs so branding is visible from behind, not only from the front.
04
Available on every platform
The branding specification is available on the Q, Y, T, X, J and K models, so brand consistency does not dictate vehicle type.
05
Two-tone paint
Contrasting roof, accent or lower-body colour schemes for fleet differentiation.
06
Interior branding
Steering wheel cover, floor mat and pedal trim colour matched to complete the cabin.
07
Fleet quantity consistency
Volume builds quoted as a single production slot with consistent colour and trim across the whole fleet.
08
Pre-production sample
A sample or pre-production unit can be arranged before a full batch on first-time custom orders.
09
All seat layouts available
From 2 to 10 seats, so a branded fleet can serve both transport and utility routes.
Applications
Where the LZ-GF-C is used
Resort and hotel identity
Branded guest shuttle that reinforces the property name at every arrival and departure point.
Event and wedding hire
Branded fleet for event operators and rental partners working temporary sites.
Car park and mobility services
Branded patrol, guest and shuttle carts for private sites and paid car parks.
Corporate and campus fleets
Branded vehicles for campuses, retail centres, business parks and factory estates.
Seat Layouts
Eight layouts on one platform
1C · 2 passengers
A single forward-facing row. The shortest body in the range, used for single pairs, estate runs and light cargo work.
1U · 4 passengers
One forward-facing row plus a rear-facing rear bench. Compact four-passenger layout for narrow estate roads and short shuttle routes.
2C · 4 passengers
Two forward-facing rows. The standard four-passenger layout for estates, campuses and private roads.
2U · 6 passengers
Two forward-facing rows plus a rear-facing rear bench. The most requested layout in the range, balanced for resort and campus shuttle work.
3C · 6 passengers
Three forward-facing rows, no rear-facing bench. Longer body, all passengers face forward, best for guided sightseeing where commentary matters.
3U · 8 passengers
Three forward-facing rows plus a rear-facing rear bench. High passenger capacity without stretching the body much further.
4C · 8 passengers
Four forward-facing rows. The workhorse group layout for campus and corporate fleet transport.
4U · 10 passengers
Four forward-facing rows plus a rear-facing rear bench. Maximum seating configuration available in the range.
Codes ending in C are forward-facing standard seats. Codes ending in U add a rear-facing rear bench at the back of the vehicle.
Body Colours
Body colour library
Sky Blue, Mint Green, Aqua, Pearl White, Champagne, Sunflower, Rose, Lavender, Ocean Blue, Emerald, Deep Teal, Gunmetal, Espresso, Burnt Orange, Coral, Wine Red, Midnight, Emerald Dark, Charcoal, Slate, Brick Red, Vermilion, Crimson, Plum, Custom
Custom paint matched to a Pantone code or a physical reference is available on request. Roof panels can be specified in a contrasting colour.
Tyres
Tyre optional styles
14 inch: 14-01 · Alloy / 14T Black; 14-02 · Alloy / 14T Silver; 14-03 · Alloy / 14T Black Machined; 14-04 · Alloy / 14T Gloss Black; 14-05 · Alloy / 14T Matte Black
12 inch: 10-01 · Steel / 10T White; 10-02 · Alloy / 10T Silver; 12-01 · Alloy / 12T Black; 12-02 · Alloy / 12T Machined; 12-03 · Alloy / 12T Gloss Silver
Wheel size affects ground clearance and ride height. If you are ordering for rough ground, confirm clearance before selecting a larger tyre package.
FAQ
LZ-GF-C questions
How is my logo applied to the cart?
The most visible placement is the front fascia panel, which accepts an illuminated OEM logo insert. Body panels, roof panels and seat backs can carry printed artwork. Interior trim including steering wheel cover, floor mat and pedals can be colour matched. Send vector artwork where possible and a Pantone code or reference image for the base colour.
Can branding be applied to models other than the LZ-GF-C?
Yes. The branding specification is available across the Q, Y, T, X, J and K platforms. This means a branded fleet can include a road-focused resort shuttle, a rough-site utility cart and an off-road estate vehicle while keeping one brand identity across the whole operation.
What information do you need for a quotation?
Model, seat layout and passenger count, quantity, logo artwork or reference images, target colour with a Pantone code if you have one, destination country, and any roof, glass or rear section requirements. That is enough to produce a first quotation.
Can I see a proof before full production?
Yes, a sample or pre-production unit can be arranged before a full batch, subject to slot availability. For first-time custom orders this is normally recommended, since it lets you agree the colour and artwork standard once instead of correcting it across a fleet.
What is the minimum order for custom branding?
There is a minimum quantity for custom branding and it varies by model and by complexity of the artwork. Share your target volume and we will confirm what is practical for the production slot you need.
Can you match a specific brand colour?
Yes. We work from a Pantone code where you have one, or from a physical reference or reference image. Note that large flat panels can show very slight variation across a batch, so if a brand standard is critical we recommend agreeing a physical sample first.
How long does a custom order take?
Lead time depends on the model, the configuration and how much of the artwork is new. Once artwork and colour are agreed, a branded fleet is quoted against a specific production slot. Share your required delivery date and we will confirm what is realistic.
Can a branded fleet be reordered later in the same colours?
Yes, repeat orders in an agreed colour and artwork specification can usually be matched to the earlier batch. Keep the Pantone code and artwork files on file, since that is what makes a later repeat accurate rather than approximate.